HobbyKing
EXTENDED 152MM NYLON LANDING SKID SET FOR SK450 MULTI-ROTOR QUADCOPTER FRAME
| Height | 152mm |
| Material | reinforced nylon |
Specs:, *Note:, This listing is for the extended landing skid set only. The SK450 frame is sold separately.,
152mm extended landing skid set for the SK450 multi-rotor frame. ...5 Reviews
SDSHobby
GLASS FIBER MQ250 MINI QUADCOPTER/FOUR-AXLE FLYER RTF
| Internal Resistance | 0.52 ohm |
| Most Efficient Current | 2A -6A, >70% |
| Max. Working Current | 8.5A |
| Input/ Output | 0.5A/10V |
| Size | 18mmx17.5mm (axle not included) |
| Diameter of Output Axle | 2mm |
| Length of Output Axle | 8mm |
Features:, , 1510 Brushless Motor Parameters:, KV: 2200, : 16.1g/0.57oz, Items Included:,
Glass Fiber Four-axle Rack MMC10 Master Controller Adopted HobbyWing Skywalker ...SDSHobby
LANDING GEAR FOR IDEAFLY IFLY-4 QUADCOPTER/ FOUR-AXIS FLYER
Brand:, IDEAFLY, Features:,
Using engineering plastic of military equipments, strong shock resistance.SDSHobby
MOTOR MOUNT FOR IDEA-FLY IFLY-4S QUADCOPTER/ FOUR-AXLE FLYER
Features:,
Plastic material; The engineering materials for the military police are ...SDSHobby
SHELL FOR IDEA-FLY IFLY-4S QUADCOPTER/FOUR-AXLE FLYER
Specification:,
Super streamline design, more ornamental and entertaining.HobbyKing
X-4 FPV FIBERGLASS QUADCOPTER FRAME 485MM
| Length | 685mm |
Features:, • Unique full-body fiberglass construction, Specs:, Width:, 485mm (motor shaft center to center between front/rear arms), Frame weight:, 730g (w/out electronics), Requires:, 28-XX or 35-XX brushless outrunner motor x 4,
Just when you thought that all multi-rotor frames looked the ...5 Reviews
SDSHobby
HOBBYWING PENTIUM V4 VERSION 10A BRUSHLESS ESC FOR IFLY-4 QUADCOPTER/ RC AIRPLANE
| Cont. Current | 10A |
| Burst Current (>10s) | 12A |
| BEC Model | Linear |
| BEC Output | 5V/1A |
| Cells of Li-Po | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Net Weight | 9.4g |
| L*W*H (Size) | 38*18*6mm |
| Application Fields | model airplanes and helicopters |
| Safety arming feature | Regardless of the throttle stick position, the motor will not spin after battery connected. |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters. |
| Multiple program methods supported | transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
| Size | 92mm (L) * 52mm (W) * 6mm (H). |
| Weight | 26g. |
| Input Voltage | 4.8-6V |
Specifications:, Equipped LED Program Card (Need to Buy Separately):, The program card is NOT included, any interest please glance over the following information on the, Application Fields (only for hobby wing’s ESC):, Fly Fun (also called "Fentium"), Specification:, Kindly Remark:, This program card is NOT suitable for Platinum series airplane ESC., Programmable Item:,
Features : User can use the program card to program ...SDSHobby
MOTOR MOUNT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specification:,
Mount can be equipped with carbon fiber tube with 14mm ...SDSHobby
PLASTIC IN REVERSE PROP ST1038*2PCS FOR BUMBLEBEE ST550 RC QUADCOPTER
| Size | 10x3.8 |
| Net Weight | about 10g/pcs |
| Aperture | 9mm |
| Suitable for Axle Base | 450mm - 550mm |
| Suitable for Motor | 800KV-1200KV |
| Available Colors | yellow and black |
Specifications:,
(sent randomly)SDSHobby
PLASTIC POSITIVE PROPELLER ST1038*2PCS FOR BUMBLEBEE ST550 RC QUADCOPTER
| Size | 10x3.8 |
| Net Weight | about 10g/pcs |
| Aperture | 9mm |
| Suitable for Axle Base | 450mm - 550mm |
| Suitable for Motor | 800KV-1200KV |
| Available Colors | yellow and black |
Specifications:,
(sent randomly)SDSHobby
QUADCOPTER X465 KIT WITH CARBON FIBER MOUNT BOARD
| Mount board | 2pcs ,carbon fiber |
| Holder arm | 2pcs red, 2pcs white, durable, easy to repair, plastic, |
| distance between shafts | 465mm |
| ESC | above 30A brushless ESC |
| Battery | Li-Po Battery/ 2200mAh/20C/3S |
Specifications:, Protection cover:, transparent,, Recommended Equipments (need to buy separately):, Fly controller:, KK fly controller V5.5 or other Four-axis fly controller, Motor:, 212motor, Propeller: two blade propeller positive and in reverse 10*4.5 or three blade propeller positive and in reverse 9*4.5,
resistance to fall Include installation accessories 1pcs magic stick to ...SDSHobby
QUADCOPTER RACK FOR X600
| Rack Material | high intensity glass fiber, CNC processed |
| Bracket | aluminum, high intensity, durable, easy to repair. |
| Motor Mount | carbon fiber material, strong compatibility |
| Whole Controlling System | Korea KK V2.0 |
| Motor | 2208 2212 |
| ESC | FLYFUN 20A or XXD 30A |
| Propeller | propeller positive and in reverse 10*45 |
| Battery | Li-Po Battery/ 2200mAh/20C/3S |
Specifications:, Features:, Recommended Equipments (need to buy separately):,
Unique shock absorber bracket Suitable for Cross and X shaped ...SDSHobby
RC QUADCOPTER X4 FLYER WHOLE SET INCLUDE 4 HOOP PROTECTION FUSELAGE
| Product Size | 80x80x20cm |
| Shaft distance | 510mm |
| Whole weight | 1200g(include 4 Hoop Protection Fuselage) |
| Max Flying weight | 2000g |
| Motor | 2815 Brushless Motor 750KV |
| Propeller | 1245 clockwise&conterclockwise propeller |
| Max Current of ESC | 10A |
| Landing Gear | Aluminium alloy landing gear |
| Flying Time | 12 Minutes |
| PayLoad | 500g |
| Battery | 3S 1800mah-4500mah 20C Lipo battery. we suggest 3S 2200mah 20C . |
| Radio | 4CH or above . |
SDSHobby
ROTARY MOTOR ARM/ MOTOR MOUNT FOR IDEAFLY IFLY-4 QUADCOPTER/ FOUR-AXIS FLYER
Brand:, IDEAFLY, Features:,
Using engineering plastic of military equipments, strong shock resistance. Installation ...